How to Replace Parking bulb on 2016 mazda 3?
A marker light on the Mazda burned out and Osmany thought it should be something we could handle. The above video gave us a clue: the bulb can be accessed by loosening the fender liner and bending it enough so you can get your arm in the gap. You loosen the fender liner by pulling the snap-expansion plugs out and unscrewing a couple of screws under the nose of the car.
I could almost reach the socket from the under the hood by contorting my arm around and through some pipes, but that was all. I could touch it but I couldn't get a hold of it. Osmany was able to reach it from underneath, but he still needed to use a pair of needlenose pliers to untwist the socket so he could pull it out. We just used a screwdriver to pop the plugs holding the fender liner in place, we didn't buy one of the orange plastic crow bars shown in the video.
1 comment:
Even if free FTP software the cost to set it up and manage is too much. On the other hand, Binfer can be run on any computer without separate server or client components. See https://www.binfer.com/solutions/tasks/ftp-alternative-or-replacement/
Post a Comment