Found on Just Answer dot com
To install:
- Clean all mating surfaces of any residual gasket material.
- Lubricate the threads of the cylinder head bolts with clean engine oil.
- Install or connect the following:
Cylinder head with a new gasket
- Torque the bolts, in sequence, using the following procedure:
- Step 1: Bolts 1-8: 35 ft. lbs. (48 Nm).
- Step 2: Bolts 1-8: 55 ft. lbs. (75 Nm).
- Step 3: Bolts 1-8: 55 ft. lbs. (75 Nm).
- Step 4: Bolts 1-8: An additional 90°. Do not use a torque wrench for this step.
- Step 5: Bolts 9-11: 21 ft. lbs. (28 Nm).
7 comments:
Nice Article to Read. Digital torque wrenches capture peak torque or display torque measurement in real time mode. High and low setpoints with LED indicator and audible alarm facilitate Go/No Go testing.
Nice Article to Read. Imada digital force gauges capture peak force data and output data for collection by optional data acquisition software in USB, RS232, Digimatic and analog formats.
Nice Article to Read. Imada torque testers capture peak torque or display torque measurement in real time mode. High and low setpoints facilitate Go/No Go testing.
Nice Article to Read. Digital torque gauges are designed for clockwise and counter-clockwise torque testing. The Jacob’s chuck is a versatile attachment and can be used for a variety of applications.
can u tell me cateroiller Cylinder Head maintenance tips
@Ulmer: do you mean Caterpillar? All I know about Caterpillar engines is that they are big, made of cast iron and painted yellow.
Post a Comment